Just in case you were not aware, most Reolink cameras can do “save a clip if you see a person” on their own, without involving HA.
And they can either dump it to local or network storage.
The detection is done at the camera, and just fires a notification over ONVIF.

I’m currently eyeing up an Airgradient One, which uses the SHT40.
Unfortunately, I don’t have enough tinkering time at the moment to roll out much more kit.

In honesty, I use the relative humidity readings as more of a “it’s dry” “It’s OK” “it’s moist”, than expecting any sort of accuracy!
I’ve even considered mapping percentage ranges to “moist, normal, dry” in HA.

I considered this, but was forbidden: The limescale would leave it looking manky.

I think live view is how mine are configured, with a snapshot that updates every few minutes.

Then if it’s clicked, the true video stream is opened.

That’s a very good shout, as it’ll save me mucking about in bash.

That was going to be my backup plan, as I didn’t want to use any more resource if I could avoid it 😅

The good news is, we figured it out, and got the file serving out of /config/www without an auth requirement.

Aha, that was what I was after, big thanks!

So, after a bit of meddling:

The location I was placing things in was media>my media (from the HA UI).
Assets there are stored in /media, and served in 8123/media/local, but require an autoSig.
Changing permissions doesn’t affect the availability, no sig is a 401 error.

However, if the file is copied from /media to /config/www/ , it’s then served (as you said) under 8123/local.

Brill, not too painful a process for a few static images (or indeed if I’m feeling brave, I could just symlink the folders).

Maybe one day there will be a way to upload background images for picture elements cards from the UI :)

I can appreciate that!
I do have standard layouts which are mostly big button to do a thing in the room.
But I also fancied having by-floor layouts.

And you’re right: The button I have that sets the kitchen spots on/off/dim as a group is 10x more useable than a scale representation of their location in the ceiling!

HAOS under proxmox.
It’s definitely one of those “many ways to skin the cat” situations!

I’m more interested in what people are doing for internal hosting, not external hosting services. Thanks for the info, however.

It could also be that you need to re-add the thumbnails displayed in your dashboards, as the entities may be vestigial ones from when you used Dahua.

I had a weird issue recently, where after a few reboots all the radios seemed to fail with weird errors.
In a similar vein to your solution, replugging them all worked, and after restarting the services they all came back.
And this was an install which (at the time) was quite a few versions behind.

I wondered if it was something strange with the way the USB devices were passed through the hypervisor, maybe a weird race condition where HAOS was ready, but the USBs were not…Anyway, all sorted, same as you!

Feedback I’ve heard about Drip was that the interface was slightly wanting. Which is a shame. Sample of one, bear in mind!

That’s a good shout, I’d forgotten about them.

Pricey, but a very ground-up open solution. Not sure if I can stomach £350 for a pi and clamps right now!

I think one day, I might go with something like that.
But admitting my own time limitations: It would probably sit in a drawer until I got around to it, joining the RGBW strip and similar ESP I bought a few years ago!

Shelly, if you’re listening: Smart RCBOs would be interesting to explore.
As would a product that can handle, say, 16 clamps, and you buy the clamps separately.

Second question actually; How did you find the installation?
I’ll probably get an electrician to fit, but if there are any gotchas it’d be good to know before I instruct.

They only seem to sell the 50s separately, which is a shame. £50 worth of calibrated iron, hooray (!).

Ah, brilliant. In that case, I may have the confirmation to make the order.

It’s just a shame the 120A is so much more expensive! £70 vs £120.
As there is a low chance I’ll be pulling more than 50A on a circuit, but I know it’ll 100% happen one day if I cheap out!

Appreciate the response.
It’s good to get some feedback on the integration.
I also currently use some (cheap) zigbee plug monitors, which I might replace with these down the line, thanks!